SPAIN
Located in the town of Alcalá de Guadaíra, Seville, started its activity in 1964. Has a marl quarry, a crushing plant of 1000 tons / hour, crude grinding of 330 tons / hour, a clinker kiln with a production capacity of 4000 tons / day, four cement mills and two bagging lines.
It has recently supplied cement to first-rate works such as the new quay at the port of Seville and the Breña II dam.
Cement production capacity (t / year): 1,450,000.
PRODUCTOS
CEM III A 42,5 N SRC
Blast furnace cement, type III / A with medium-high strength 42.5 MPa at 28 days with normal initial strength N and resistant to sulfates / SRC.
Because it contains blast furnace slag, it has a good development of resistance at advanced ages and an increase in the durability and protection of the reinforcements.
Mandatory for the use of marine environments or those with gypsum content in the ground or waters.
CEM I 52,5 R - SR 3
Portland cement type I high strength 52.5 MPa at 28 days with high initial strength. Resistant to sulphates / SR.
Due to its high performance, it is specific for producing high-strength concretes, very suitable for the industrial manufacture of precast structural elements that require maximum resistance and are in contact with soil or waters that contain sulphates or have to be located in marine environments.
Its high performance makes it suitable for foundations in gypsum soils and/or in areas close to the sea.
CEM I 42,5 R-SR 0
Portland cement type I high strength 52.5 MPa at 28 days with high initial strength R. Resistant to sulphates / SR. Without calcium aluminate
Due to its high performance, it is specific for producing normal and high-strength concretes, very suitable for the industrial manufacture of precast structural elements that require maximum resistance and are in contact with soil or waters that contain sulphates or have to be located in marine environments.
Its high performance makes it suitable for foundations in gypsum soils and/or in areas close to the sea.
CEM I 42,5 R - SR 3
Portland cement type I normal strength 42.5 MPa at 28 days with normal initial strength. Resistant to sulphates / SR and very low tricalcium aluminum.
Due to its high performance, it is specific for producing high-strength concretes, very suitable for the industrial manufacture of precast structural elements that require maximum resistance and are in contact with soil or waters that contain sulphates or have to be located in marine environments.
Its high performance makes it suitable for foundations in gypsum soils and/or in areas close to the sea.
CEM II/A-L 42,5 R
Portland cement with limestone, high-end clinker, type CEM II / A-L of medium-high resistance 42.5 MPa at 28 days with high initial resistance R.
Recommended in the preparation of concrete, both in mass and reinforced, when rapid stripping is required. Also in the manufacture of concretes with high mechanical requirements, for light precast, for fair-faced or architectural concrete parts and for the preparation of ready-made mortars.
CEM II/B-L 32,5 N
Portland cement with limestone type CEM II / B-L of medium strength 32.5 MPa to 28
days with normal initial resistance N.
It is used in ready-mix concrete plants for the manufacture of mass concrete, stabilized mortars and self-compacting concrete.
Also recommended in the preparation of masonry mortars.
CEM I 42,5 R
Portland cement type CEM I of medium-high resistance 42.5 MPa at 28 days with high initial resistance R.
Its benefits of high initial resistance make it suitable for preparation of concrete, both in mass and reinforced, when rapid hardening is required.
Ideal for the preparation of precast and prestressed, obtaining high resistance values.